Electronic Theatre Controls PARADIGM Guía de usuario descargar pdf (Pagina 23)

MIDI Show Control 21

MIDI Show Control

Data Sources

Eos Family consoles can receive MIDI Show Control (MSC) data from a MIDI input source. Your

console can receive data from any of the available 32 sources, which have Group IDs of 1-32.

While MIDI consists of many types of data, your console will respond to only MSC data. Other MIDI

transmitted data is ignored by the console.

Eos Family consoles can also transmit MIDI Show Control data.

MIDI Show Control Devices

MIDI Show Control data carries a device ID (MIDI channel) within the data packet. MSC setup, see

Show Control Setup, page 5, allows for the specification of two device IDs: one for reception and

one for transmission. This is different than the ACN Group Tx and Rx IDs, which are the show

control gateway source ID, and transmitting ID.

Only MSC data that matches the MSC Receive Channel in Setup, or an All Call ID (127), will be

interpreted by your console.

All outgoing MSC data contains the specified transmit device ID, as specified in Setup, see Show

Control Setup, page 5.

Eos Family Command Interpretation

When your console receives a command from a MIDI source, it will look for and support the

following MIDI commands in the following ways:

• Go Runs a cue

• Stop Pauses a cue

• Resume Resumes a paused cue

• Set Controls a submaster, playback, or Grandmaster

• Fire Runs a macro

The cue-related commands (go, stop, resume) affect the console based on the cue field also

contained within the MSC data. The cue field will correspond directly to the console’s cues. In the

command/effect tables below, if a field is present in the MSC data, the name is indicated (such as

“Cue”). If it is not present in the data, a “-” is indicated.

When accompanying a MIDI “Go” command, data for the following fields will result in the following

effects

Cue Data

Field

List Data

Field

Effect

Cue List Runs the specified cue in the specified cue list

Cue - Runs the specified cue in the default cue list

- List Runs the next cue in the specified list

- - Runs the next cue in the default cue list

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Sin comentarios

Electronic Theatre Controls PARADIGM Guía de usuario Pagina 23