finished a fully working system will be turned over to the owner. Any errors, omissions, or
ambiguities are not to condition this requirement, but shall be brought to the attention of the
Theatrical Dealer in their possible effect on the intent of this specification.
5) QUALIFICATIONS
A) The manufacturer shall be one who has been continuously engaged in the production of theatrical lighting
and control equipment for at least fifteen (15) years and in the manufacture of solid state electronic
control systems and dimmers for ten (10) years.
B) Subject to the above requirements, the equipment indicated within this Section shall be by one
of the following manufacturers:
(1) Dimming and Control
1. Electronic Theatre Controls, Inc. (ETC), Middleton, Wisconsin
(2) Wiring Devices
1. Electronic Theatre Controls, Inc. (ETC), Middleton, Wisconsin
C) All equipment shall be provided by a qualified, factory-authorized theatrical equipment dealer. The dealer
shall be one who has been continuously engaged in the sale, rental and service of theatrical lighting
equipment for at least twenty (20) years and shall have at least fifteen (15) years experience in the sales
and installation of similar systems. Such dealer must maintain a full-service facility within fifty (50) miles
of the project site. Such dealer must be a member of the Professional Lighting and Sound Association
(PLASA) and adhere to the PLASA Code of Conduct. The Dealer shall be factory certified to provide
warranty service for all of the equipment in the Section.
D) The Dealer shall maintain an active rental inventory of theatrical equipment similar in nature
the equipment called for in this Section. If any equipment is delayed or backordered from the
manufacturer, the Dealer, at no cost to the owner, shall provide rental equipment to insure an
operating system by the substantial completion date.
E) Dealer shall be responsible for the installation, integration, operation and performance of all
elements of the system as described in this Section. The Dealer shall provide all warranty work
and equipment upgrades as called for in this Section.
F) Dealer Services
1) Service shall be provided directly by the dealer and service visits shall be made within
twenty four (24) hours of request.
2) Dealer shall maintain a 24-hour emergency service system. Upon owner contacting
this system, return contact must be made within fifteen (15) minutes or less. Any dealer
that does not supply a 24-hour service system must prove compliance and ability to
supply emergency and after-hours service.
3) Dealer shall provide a single full-time on staff project manager from the outset through
the completion of the project. This project manager shall be available for site meetings,
site visits, phone meetings and any necessary functions relating to the successful
completion of the project. This project manager shall be knowledgeable of all the
equipment within the project and able to assist and troubleshoot challenges, either
potential or realized, with the installing contractor when requested.
4) Dealer shall have on staff a minimum of one (1) ETCP certified member.
G) Subject to the above requirements, the equipment indicated herein shall be provided by the
following dealers:
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales