Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 127)

8 Using Groups 113

Offset

You can use the {Offset} softkey to aid in channel selection prior to storing groups. The offset

options are {Odd}, {Even}, {Reverse}, and {Random}. For example:

• [1] [Thru] [9] {Offset} {Odd} [Record] [Group] [5] - records all odd numbered channels

between 1 and 9 to Group 5.

• [1] [Thru] [2] [0] {Offset} {Reverse} [Record] {Group 3} - records channels 1-20, in reverse

order, to Group 3 using the direct selects.

Editing and Updating Groups in Live

Existing groups can be updated or rerecorded in Live. If you rerecord an existing group, a

confirmation is required (unless disabled in “Setup”). By rerecording a group, you replace the

contents of the group, you do not add to it. Updating a group does not require a confirmation and

adds channels to the group, rather than replacing them.

Other editing or updating examples are:

• [Group] [x] [Label] [Enter] - clears the label.

• [Group] [x] [Label] [name] [Enter] - stores a new label.

• [1] [Thru] [5] [Update] [Group] [n] [Enter] - adds channel 1-5 to existing Group n.

• For record examples, please see Recording Groups Live, page 112.

Selecting and Recalling Groups

Groups may be recalled from the control keypad or the direct selects.

To select a group:

• [Group] [1] [Enter] - selects all channels in Group 1

• [Group] [1] [at] [5] <0> [Enter] - selects Group 1 and places all channels within at 50%

• {Group 1} - Selects all channels in Group 1

If [Next] is used after a group selection, it accesses the first ordered channel in that group. Pressing

it again accesses the second ordered channel in that group, and so on. [Next] - used after the last

channel in the group - accesses the first channel in the group again.

[Last] may be used with group selects similar to [Next]. Press [Select Last] to reselect the entire

group.

Deleting Groups

When you delete a group, the group number and all contents from the Group List Index and direct

selects are deleted. Delete commands require a confirmation by default. This can be altered in the

default settings. If you disable confirmations, the second enter is not required in the following

examples:

Group deletion features include:

• [Delete] [Group] [5] [Enter] [Enter] - Deletes Group 5

• [Delete] [Group] [3] [+] [Group] [5] [Enter] [Enter] - deletes groups 3 and 5.

• [Delete] [Group] [3] [Thru] [9] [Enter] [Enter] - deletes groups 3 through 9.

• [2] [Delete] [Group] [7] [Enter] - deletes channel 2 from group 7.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 337 338

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 127