Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 37)

3 System Basics 23

Power

Power up the console

Step 1: Attach the appropriate power cable to the IEC connector on the rear of the console.

Step 2: Press the I/O switch (I is “on”) next to the IEC connector on the rear of the console to

turn power on. This will provide power to all internal electronics.

Step 3: Press the power button, located in the top left corner of the console, above the USB

port. The button LED will illuminate blue to indicate the console is running. The

console will boot up into the Ion environment.

Step 4: Click {Let’s Begin} in the CIA. The Ion system is now ready for use.

Power down the console

Step 1: After saving your show (see below), in the browser menu select [File]>[Exit Ion]. A

dialogue box opens asking you to confirm.

Step 2: Confirm this command by clicking {Yes} in the dialog box. The Ion application will

close and you will enter the Eos Configuration Utility (ECU - also know as the Eos

Shell).

Click {Shutdown} in the ECU screen. Confirm again, the console will power down and the

blue power LED will go out.

Note: Ion is a persistent storage console. Therefore if you shut down your system

without saving the show file, you will return to the same place in your show when

you reboot.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 337 338

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 37