Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 196)

182 Ion Operations Manual

Virtual Faders

You can have access to multiple cue lists at once by using the virtual faders (see Virtual Faders,

page 29). This will give you the ability to run multiple cue lists or submasters from multiple faders at

the same time.

Assigning Faders

Playbacks and submasters can be defined on the virtual faders in setup (Setup, page 79). The

location of playbacks and submasters can also be defined as the contents of those targets are

stored. You cannot define grand masters in this manner, they must be defined in setup.

If a fader is an empty playback or an empty submaster, a cue can be loaded to that location by

selecting the cue from the command line and clicking the associated [Load] key. The fader will then

be automatically assigned as a playback, using the lowest unused playback number.

Once a cue list is loaded to a fader, either manually or by default, storing to that cue list

automatically plays the cue back on the appropriate fader, when auto playback on record is enabled

in Setup.

When a cue list is loaded to a playback, all cue attributes of that cue list are in effect. When a new

cue list is loaded, any fader attributes that can be set as direct action from the facepanel (such as

filters, timing disable, etc.) are maintained. Loading a new cue does not change the manual fader

attributes.

With Auto Playback Enabled

“Auto Playback” is a record function enabled in setup (Setup, page 79), that automatically executes

cues recorded in live on playback faders. When the cue is executed on the playback fader, any

manual parameters involved in the record operation are automatically released to the cue and all

other values stored in the cue are owned by that cue.

When the first cue is stored on Ion, that cue automatically loads on the master fader.

For Example:

If cue list 3 is stored before cue list 1, cue list 3 will automatically load on the master fader

pair. To change the assignment, making cue list 1 the priority cue list, you can manually

load cue list 1 to the master fader pair as described below.

Assigning Playback Faders Manually

To load a new cue into the pending file of a playback fader, when “Auto Playback” is disabled in

setup or when you want to move a cue list to a different fader, first specify that cue on the command

line, press [Enter], then click or press the associated [Load] button for the destination playback

fader.

• [Cue] [4] [Enter] [Load] - changes the selected cue and loads it to the associated fader. This

action assumes cue 4 is from the same cue list as is currently selected.

• [Cue] [3] [/] [1] [Enter] [Load] - changes the selected cue and loads it to the associated fader.

Changing Virtual Fader Pages

Ion has 30 pages of ten virtual faders each. You can page through the 30 available pages of faders

by clicking the desired page in the virtual fader display. Click the arrow buttons to advance through

the page number buttons until you find the desired page.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 337 338

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 196