Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 295)

B Multi-console and Synchronized Backup 281

Synchronized Backup

Once you have changed settings to facilitate a multi-console system on the network, you may

activate synchronized backup to ensure show data security.

Eos/Ion synchronized backup is designed so that during normal operation the primary (master)

console controls the lighting system and any console configured as backup or client synchronize

with the primary. The following activities will synchronize between consoles when operating in a

backup system:

• Playback

• Record operations

• Manually set data

• Show file and show data

Only Ion consoles, Eos consoles, or RPUs can function as a master or backup.

Setting up Synchronized Backup

Before backup is possible, you must have at least two Eos devices (Consoles or RPUs only)

connected to the network. One must be assigned as primary and one as a backup.

To assign a backup to a primary:

Step 1: Exit the Ion/Eos environment (Browser>Exit Ion) on the console you wish to act as

the backup. This will send you to the ECU welcome screen.

Step 2: Click on the {Backup} button in the welcome screen. The console will then startup the

Eos software, this time in backup mode. Eos will try to connect to a master console.

The CIA will say “Waiting for Primary. One moment please...”.

Step 3: If the backup doesn’t connect after a few moments, click the {Troubleshoot} button

in the CIA. This will open the network configure screen in the CIA.

Step 4: Select a master console from the list on the right. If no masters are available in the list,

a master console is not connected to the network.

Step 5: Press {Change Master}. The backup Eos will synchronize with the master.

1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 337 338

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 295