Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 202)

188 Ion Operations Manual

Using Rate Override

To collect a playback fader for rate control, press [Fader Controls] {Rate} & [Load] for the required

fader. A subset of faders can be collected by pressing and holding {Rate} while clicking the [Load]

button for the associated faders you would like to add.

Use the rate encoder to adjust the rate dynamically. The default is 100%, which is real time

(example: 5 seconds = 5 seconds). Decrease the percentage to slow the cue down. Setting the rate

to 0% will stop the cue. Increase the percentage to speed up the event.

Following are some examples of rate:

• A 50% decrease rate applied to a 5 second event will play the cue in 10 seconds.

• A 200% increase rate applied to a 5 second event will play the cue in 2.5 seconds.

The top rate adjustment is 2000%. All timing values associated with a cue (including any follow or

hang times) are affected by the rate modification proportionally.

Rate override resets to 100% when the cue with the override is complete, unless it has been linked

with a follow or hang time. If cues are linked for automatic activation by a follow or hang time, the

proportional rate value will continue until a cue is activated manually.

If a cue is complete, any rate adjustment applied affects the cue in the pending file. When that cue

is subsequently activated, the adjusted rate is used to direct timing.

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 337 338

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 202