Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 299)

C Remote Processor Unit (RPU) 285

Appendix C

Remote Processor Unit (RPU)

Overview

This appendix outlines the setup and configuration of your Eos Remote Processor Unit (RPU). The

Eos RPU can be used as a primary, backup, or client processor in an Eos system (see Large

System Riser, page 19). It can also be used for independent playback applications.

Eos RPU ships with the following:

• Remote Processor Unit

• USB Keyboard

• USB Mouse

• Rack Mount Hardware Kit

• IEC Power cords with varying connectors

• Dual-DVI video Y-adapter - (screen resolution of 1280x1024 required)

• DVI (male)-to-VGA (female) adapter

• Eos System Recovery CD

Hardware Setup

Rear Panel

Step 1: Attach the appropriate IEC power cord to the power connector.

Step 2: Attach the dual DVI connector/Y-adapter to the DVI port. If you have VGA monitors,

attach the VGA adapters to the DVI adapter. Do not use the VGA connectors on the

back of the RPU.

Step 3: Connect the USB mouse and keyboard to the USB connectors. If you want to use a

PS2 mouse or keyboard (not provided), you may use the appropriate connectors on

the RPU.

Step 4: Attach a network ethernet cable to the ethernet port.

Step 5: Once all accessories have been connected, you may activate the hard power switch

on the rear panel.

Note:

Monitor screen resolution must be at least 1280x1024.

Hard Power

Switch

IEC Power

Connector

Dual DVI

PS2 Mouse and Keyboard

USB

ports

Ethernet

1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 337 338

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 299