
4 Live Editing 119
Enable/Disable MBB for the system:
Step 1: Press [Setup] [1] [Enter] to view the System Settings menu.
Step 2: Press [1][4] [Enter] to select Move Before Bright.
Step 3: Press:
• [1] [Enter] to enable MBB.
• [0] [Enter] to disable MBB.
Note:
MBB must be enabled in System Settings for MBB to occur in a show. Use individual cue
settings to turn MBB off for specific cues when needed.
Set the MBB Delay and Fade times:
Step 1: Press [Setup] [1] [Enter] to view the System Settings menu.
Step 2: Press [1][5] [Enter] to select the MBB Times.
Step 3: Enter the desired delay time between 0 seconds and 99:59 minutes and press
[Enter].
Step 4: Enter the desired fade time between 0 seconds and 99:59 minutes and press
[Enter].
MBB Settings per Cue
You can disable MBB for cues where you want to see a move occur live. While you can edit
the MBB setting for individual cues regardless of whether MBB has been enabled at the
System Settings level, MBB will only occur if the option has been enabled in the Systems
Settings menu.
You can edit MBB for a cue in the Stage, Blind, Fader displays, and in the Blind Cue List.
Which softkey MBB appears on depends upon which display you are using. Generally,
[S1- MBB] appears in Stage and Fader displays and [S8 - MBB] appears in Blind displays.
Disable/Enable MBB for a specific cue:
Step 1: Enter the display you want to use to edit the cue.
Step 2: Press [Cue] [x] <S7 - More Softkeys> [S1- MBB or S8 - MBB]:
• [1] [Enter] to enable MBB.
• [0] [Enter] to disable MBB.
Comentarios a estos manuales