Electronic Theatre Controls Emphasis Lighting Control System Manual de usuario descargar pdf (Pagina 214)

204 Emphasis Console v2.0.0 User Manual

DMX Output

DMX output from your Facepanel is treated the same as DMX output ports on a DMX Node.

The DMX output ports on your Facepanel can be configured locally.

To change the EDMX assignments of the DMX output ports:

Step 1: Power up or reboot the Facepanel.

Step 2: When the prompt appears at startup, press [1][2][3] to enter the configuration

menu.

Step 3: Using the down-arrow [

v] key, scroll to DMX and press [Enter].

Step 4: Using the up- or down-arrow [

u][v] keys, scroll to “DMX Output Port Timing” and

press [Enter].

Step 5: Using the up- or down-arrow [

u][v] keys, scroll to the new timing and press

[Enter]. The default setting is “MAX”.

Step 6: Using the down-arrow [

v] key, scroll to “DMX Input Port n Start Channel” and

press [Enter]. The value of n is the port you want to adjust.

Step 7: Using the Facepanel numeric keypad, type the new EDMX starting address and

press [Enter].

Step 8:

Using the down-arrow [

key

, scroll to “DMX Input Port n Channel Count” and

press [Enter]. The value of n is the port you want to adjust.

Step 9:

Enter the new channel count. The default value is “512”.

Step 10:

Press [Enter].

Step 11:

Repeat steps 6-10 for each port you want to adjust.

Note:

If you make an error while changing any of these settings, and you want to return to the

previously stored values, do not press [S8]. Simply turn the Facepanel power off and on

again. The previous settings will be restored.

Step 12:

Press [S8] to save your settings and exit the DMX configuration screen.

Step 13:

Press [S8] to save your settings and exit the main

configuration screen.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 317 318

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Manual de usuario Pagina 214