Electronic Theatre Controls Emphasis Lighting Control System Manual de usuario Pagina 228

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 318
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 227
218 Emphasis Console v2.0.0 User Manual
SMPTE
SMPTE may be input on a node (currently the Facepanel is the only input option) for
transmission to the Emphasis Server over ETCNet2.
The SMPTE Input Port ESMPTE ID (Facepanel) setting maps to the ESMPTE Receive
(Emphasis Visualization) setting. You cannot have multiple Facepanels with identical
SMPTE Input Port ESMPTE ID settings, but you may have multiple Emphasis Servers with
identical ESMPTE Receive settings. In this case, you would have a single input source
broadcasting SMPTE to multiple Emphasis Servers.
To set the ESMPTE ID value on the Facepanel:
Step 1: Power up or reboot the Facepanel.
Step 2: When the prompt appears at startup, press [1][2][3] to enter the configuration
menu.
Step 3: Using the down-arrow [
v] key, scroll to SMPTE and press [Enter].
Step 4: With “SMPTE Input Port ESMPTE ID” highlighted, press [Enter].
Step 5: Using the facepanel numeric keypad, enter the ID number. This may be any
value between 0-255 (“0” will disable SMPTE Input). The default value is “1”.
Step 6: Press [Enter].
Note:
If you make an error while changing any of these settings, and you want to return to the
previously stored values, do not press
[S8]. Simply turn the facepanel power off and on
again. The previous settings will be restored.
Step 7: Press [S8] to save your settings and exit the SMPTE configuration screen.
Step 8: Press [S8] to save your settings and exit the main configuration screen.
To set the ESMPTE ID value in Emphasis Visualization:
Step 1: In the Emphasis mode Setup menu, click IO.
Step 2: In the “ESMPTE Receive” field, enter the new value. This may be any value
between 0-255 (“0” will disable ESMPTE Receive). The default value is “1”.
Step 3: Click OK.
Vista de pagina 227
1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 317 318

Comentarios a estos manuales

Sin comentarios