
Express 125/250 User Manual, v.3.1 9
Using the trackpad
Use the Express trackpad to set rates and levels. The trackpad operates
in three modes, single mode, double mode, and XY mode, described
below. You can also set the trackpad’s sensitivity.
Trackpad notes:
• If you have channels selected from both kinds of link, the trackpad
defaults to double mode.
• In double mode you may only set one side at a time.
Sensitivity
To the left of the trackpad you will find two buttons that control trackpad
sensitivity. The top button has a rough texture. Press this to set the
trackpad for low sensitivity. The lower button has a smooth texture. Press
this to set the trackpad for high sensitivity. Use high sensitivity for precise
level or rate adjustments. Use low sensitivity for faster, less precise
adjustments.
Single
mode
Most of the time the trackpad is in single mode. If the
console prompts you for a rate or a level, moving your
finger up on the trackpad increases the rate or level.
Moving it down decreases the rate or level.
Double
mode
If you use the Link List function to link two or more
channels and then select any linked channel, the
trackpad automatically switches into double mode. In
double mode the trackpad is divided into two regions,
The left side controls channels in the X half of the link
(colored gold on the display). The right side controls
channels in the Y half of the link (colored yellow on the
display). Move your finger up or down on either side to
control channel levels in the corresponding link.
XY
mode
If you use the Link List function to link two or more
channels and set the link’s position attribute for XY
position, then select any linked channel with that
attribute, the trackpad automatically switches into XY
mode. In XY mode move your finger right or left on the
trackpad to control channels in the X half of the link
(colored gold on the display). Move your finger up or
down to control channels in the Y half of the link (colored
yellow on the display).
Comentarios a estos manuales