Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 277)

Express 125/250 User Manual, v.3.1 263

Dimmer status

The Dimmer Status display provides information about dimmers, including

size and type, recorded load, firing mode, output curve, rack, slot, panic

mode, and boost. Press [Setup] [9] [Enter] [3] [Enter] to access the

Dimmer Status display.

Up to 16 dimmers are shown in the display at once. If a dimmer has an

error condition, the entire dimmer row is highlighted in yellow (ordinarily

the line is in gray). Dimmer errors are also identified in the About Dimmer

display. See About Dimmer with ETCLink, page 47.

Press [S5], Select Dimmer, [#] [Enter] to select a specific dimmer or use

[+] and [–] keys to move through the list of dimmers a page at a time.

Following is an explanation of column contents.

• Type identifies the ETC type designation.

• Recorded load displays the load at which the selected dimmer was

recorded.

• Firing mode identifies whether the dimmer is normal, doubled, or

switched. “--” indicates a normal firing mode.

• Curve identifies the output curve assigned to the dimmer.

• Rack identifies the dimmer’s rack number.

• Slot identifies the dimmer’s slot number in the rack.

• Panic mode identifies whether the dimmer is assigned to a panic

circuit. “--” indicates an unassigned dimmer.

• Scale/Boost indicates either the dimmer’s Scale or Boost value.

Either can be returned for each dimmer depending upon the rack’s

CEM software. Scale is expressed in voltage and indicated by a “V”

following the number. Boost is expressed in percentage and indicated

by a “%” following the number. A non-boosted level of 100 percent

is indicated by the symbol “--”.

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 379 380

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 277