Electronic Theatre Controls Emphasis Lighting Control System Especificaciones descargar pdf (Pagina 253)

Express 125/250 User Manual, v.3.1 239

Setting up a link

To set up a link, you must assign at least one channel to the X channel list

and one channel to the Y channel list. In the following example, two color

scrollers are linked so that their color settings are controlled by the

trackpad. For the two scrollers, color is controlled by channels 1 and 11,

respectively.

To link two channels, follow these steps:

Keystrokes:

Action:

1. Press [Setup] [1][1] [Enter].

Selects Channel Attributes display

2. Press [S7], Link List.

Selects Link List display

Prompt reads:

Select link number (Channels in ML

fixture patch cannot be linked)

3. Press [1] [Enter].

Selects link number, for instance 1.

Prompt reads:

Select X channel number(s)

(Precede with AND to add to

existing link, or EXCEPT to delete

from link)

4. Press [1] [→].

Channel 1 is assigned to the link’s X

list. Prompt reads:

Select Y channel number(s)

(Precede with AND to add to

existing link, or EXCEPT to delete

from link)

5. Press [1][1] [→].

Channel 11 is assigned to the link’s Y

list. Set the trackpad mode for this link

Prompt reads:

Select fixture type, then press

ENTER (1=XY position, 0=other)

Select link number (Channels in ML

fixture patch cannot be edited)

6. Press [0] [→].

The position column pertains to the mode in which the

trackpad operates for linked channels. See Using the

trackpad, page 9, for information about the XY and double

modes of trackpad operation.

The link sets the trackpad to double

mode. Link entry is complete

7. Go back to step 3.

Create additional links, if needed

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 379 380

Comentarios a estos manuales

Sin comentarios

Electronic Theatre Controls Emphasis Lighting Control System Especificaciones Pagina 253

Comentarios a estos manuales